iFixit has posted its teardown of the new Apple iPad Air.
● This iPad Air can be identified by the model number A1475.
● The top edge now sports a dual mic
● Volume is now adjusted by two separate buttons
● The speakers have gone stereo and moved to either side of the Lightning connector
● 3.73 V, 32.9 WHr, two-cell battery
● LG Display model LP097QX2
● Apple APL5698 A7 Processor—a slightly different than the APL0698 in the iPhone 5s
● Elpida F8164A1MD 1 GB LPDDR3 SDRAM
● Qualcomm M9616M LTE Processor with 1 Gb (128 MB) of DRAM
● 1.2-megapixel, 720p FaceTime camera
iPad Air Repairability Score: 2 out of 10 (10 is easiest to repair)
● The LCD is easy to remove once the front panel is taken off the iPad.
● The battery is not soldered to the logic board. We'll give it that.
● Just like in previous iPads, the front panel is glued to the rest of the device, greatly increasing the chances of cracking the glass during a repair.
● Gobs, gobs, and goblins of adhesive hold everything in place. This is the most difficult battery removal procedure we've seen in an iPad.
● The LCD has foam sticky tape adhering it to the front panel, increasing chances of it being shattered during disassembly.
● You can't access the front panel's connector until you remove the LCD.
You can check out a few photos below or hit the link for the full teardown.
You can now download the new Limerain App and follow Limerain on the go. Also follow Limerain on Twitter, Facebook, or RSS to be notified of any updates.
Send us a story or tip @ TipsForLimerain.firstname.lastname@example.org
- Posted using my iPhone 5s